1. ZHU Y.Z，Microstructure-Based Strength Distribution Across the Welds of Nickel-Based Superalloy Inconel 751 and Austenite Steel 21-4N Joined by Inertia Friction Welding, Metall. Mater. Trans. B, 2013.4 (SCI, EI)
2. ZHU Y.Z，Macroscopic Distribution of Residual Elements As, S, and P in Steel Strips Produced by Compact Strip Production (CSP) Process,Metall. Mater. Trans. A, 2012.7 (SCI, EI);
3. ZHU Y.Z，, COMPARISON STUDY OF SINGLE DIRECTION AND FRICTION ASSISTED COMPACTION OF MULTIPLE ALLOY POWDERS BY FINITE ELEMENT SIMULATION, powder Metall. Metal ceramics,2012,9,(SCI, EI)
4. ZHU Y.Z，A method to study interface diffusion of arsenic into a Nb-Ti microalloyed low carbon steel, Int. J. mineral,Metall. Mater.,2012,9 (SCI, EI);
5. ZHU Y.Z，Grain boundary segregation of minor arsenic and nitrogen at elevated temperatures in a microalloyed steel,Int. J. mineral,Metall. Mater.,2012,5 (SCI, EI);
6. ZHU Y.Z，Microstructural mapping in closed die forging process of superalloy Nimonic 80a valve head,J. Alloy Compound,2011,9 (SCI, EI);
7. ZHU Y.Z，Distribution of arsenic on micro-interfaces in a kind of Cr, Nb and Ti microalloyed low carbon steel produced by a compact strip production process, Mater. Chem. Phys.,2011.130, (SCI, EI);
8. ZHU Y.Z，Effects of thermo-mechanical treatment and microalloying with Cr, Nb and Ti on phase transformation in C–Mn steel strips produced by compact strip production process,Mater. Sci.Eng.A,2011,528(SCI, EI)
9. ZHU Y.Z，Comparative study on effects of microstructures of hot rolled and twin roll casting 1235 aluminium alloy on surface quality of aluminium foils produced,Mater. Sci. Technol.,2011,4,(SCI, EI);
10. ZHU Y.Z，Microstructure and Property of Ni76Cr19AlTi Side in Inertia Friction Weld Joint of the Superalloy Ni76Cr19AlTi and the Martensite Stainless Steel ,ISIJInternational, 2010.11,(SCI, EI);
11. ZHU Y.Z，Pressing vacuum sintering of multipowders for manufacturing novel engine valve seat on Gleeble 1500 simulator,Powder Metall.,2010,1, (SCI, EI)
12. ZHU Y.Z，Tension deformation mechanism and fracture characteristics of high nitrogen steel 6Cr21Mn10MoVNbN at 25–800C,Mater. Sci. Technol.,2009.8, (SCI, EI)
13. ZHU Y.Z，Microstructural evolution in 4Cr10Si2Mo at the 4Cr10Si2Mo/Nimonic 80A weld joint by inertia friction welding, J. Alloy Compound,2009,476, (SCI, EI)
14.ZHU Y.Z，Surface inclusions and their evolution on strip rolled on CSP line and in following cold rolling process,Ironmaking & steelmaking,2009,7, (SCI, EI)
15. ZHU Y.Z，Evolution of carbides and carbon content in matrix of an ultra-high carbon sintered steel during heat treatment process, J. mineral,Metall. Mater.,2009,3 (SCI, EI);
16. ZHU Y.Z，Cold densification behaviour of multiple alloy powder containing Fe–Cr and Fe–Mo hard particles, Powder Metall., 2008,2 (SCI, EI);
17. ZHU Y.Z，Scale Accretion on Homogenization Furnace Rollers in Compact Strip Production Mills and Its Densification Mechanism, ISIJ Int,2008,5 (SCI, EI)
18.ZHU Y.Z，Compression characteristics of 6Cr21Mn10MoVNbN heat resistant valve alloy at elevated temperatures, Ironmaking & steelmaking, 2008,1 (SCI, EI)
19. ZHU Y.Z，Effects of cryogenic treatment on mechanical properties and

microstructure of Fe-Cr-Mo-Ni-C-Co alloy, J. Cent. South Univ. Technol. (2008) 15, (SCI, EI)

和美國哈佛大學、加州大學圣地亞哥分校、邁阿密大學及日本岐阜大學相關教授有比較密切的學術交流和合作研究