• 2026考研英語全程班 6班
• 26考研全科上岸規劃營「擇校▪規劃▪備考」
• 武漢理工大學2026考研專業課復習資料「真題▪筆記▪講義▪題庫」

一、姓名：黃尚宇

二、基本情況：

1、出生年月：1963年10月

2、學位：碩士

3、職稱：教授

4、工作院系：材料成型加工系

三、教育經歷(從大學開始)：

2005/08-2006/09，俄亥俄州立大學，材料加工工程，訪問教授

1996/02-1996/07，哈爾濱工業大學，塑性加工，在職進修

1984/09-1987/03，南京航空學院，宇航制造工程，碩士

1980/09-1984/07，南京航空學院，宇航制造工程，學士

四、工作經歷：

2010/03-至今，武漢理工大學，材料成型加工系，教授/博導/系主任

2002/06-2010/03，武漢理工大學，材料成型及控制工程系，教授/博導/系主任

2001/03-2002/06，武漢理工大學，塑性成形與計算機應用研究所，教授/所長

2000/11-2001/03，武漢理工大學，車身設計與制造教研室，教授

2000/05-2000/11，武漢理工大學，車身設計與制造教研室，副教授

1996/10-2000/05，武漢汽車工業大學，車身設計與制造教研室，副教授

1995/05-1996/10，武漢汽車工業大學，車身設計與制造教研室，教師

1988/04-1995/05，武漢工學院，模具教研室，教師

1987/03-1988/04，武漢工學院，鍛壓教研室，教師

五、研究領域(不多于3個)：

1、輕量化、難成形材料成形加工新技術

2、材料成形過程模擬、優化及精確控制

3、微電子封裝材料制備加工新技術

六、科研項目(不多于5項)：

1、 微電子封裝環保釬焊材料電磁壓制制備技術的基礎研究(國家自然科學基金：51475345)

2、 高應變率復雜應變路徑下車身高強鋼的塑性變形行為研究(國家自然科學基金：51205298)

3、 鎂合金板材均勻壓力線圈電磁溫熱復合成形基礎研究(國家自然科學基金：50875192)

七、代表性論文及著作(不多于10項)：

[1]Fei Feng, Shangyu Huang*, Zhenghua Meng, Jianhua Hu. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures. Materials and Design, 57:10-20, 2014

[2]Fei Feng, Shangyu Huang*, Zhenghua Meng, JianhuaHu. A constitutive and fracture model for AZ31B magnesium alloy in the tensile state. Materials Science & Engineering A, 594: 334-343, 2014

[3]Fei Feng, Shangyu Huang*, Jianhua Hu, Zhenghua Meng, Yu Lei. Analysis of the bulging process of AZ31B magnesium alloy sheet with a uniform pressure coil. The International Journal of Advanced Manufacturing Technology, 69: 1537-1545, 2013.

[4]馮飛,黃尚宇*,胡建華,雷雨,孟正華. 溫度對AZ31B鎂合金板材電磁成形的影響. 塑性工程學報 ,20(6):56-61, 2013

[5]雷雨,孟正華,胡建華,馮飛,黃尚宇.兩種典型車用高強鋼板高速率成形試驗研究. 中國機械工程, 24(18):2529-2532, 2013.

[6]Zhenghua Meng, Shangyu Huang*, Jianhua Hu. Effects of process parameters on warm and electromagnetic hybrid forming of magnesium alloy sheets. Journal of Materials Processing Technology, 211(5): 863-867, 2011.

[7]孟正華,黃尚宇*,胡建華. 鎂合金板材溫熱電磁復合成形試驗研究. 機械工程學報, 47(10):38-42, 2011.

[8]余世浩、黃尚宇主編，模具CAD基礎(國家“十一五”規劃教材)，武漢：武漢理工大學出版社，2009

[9]余世浩、華林、黃尚宇主編，CAD/CAM基礎，北京：國防工業出版社，2007

[10]中國模具工程大典(主編第4卷第3篇沖模結構設計)，北京：電子工業出版社，2007

八、聯系方式：

1、Tel：18986281313

2、E-mail：huangshy@whut.edu.cn

3、工作地址(實驗室)：材料大樓402室

1.Name: Shangyu Huang

2.Brief introduction:

1)Date of birth: 11/10/1963

2)Degree: Master

3)Title: Professor

4)Working department: Department of Materials Processing

3.Education experience(after entering university):

2005/08-2006/09, The Ohio State University, Material Processing Engineering, Visiting Professor

1996/02-1996/07, Harbin Institute of Technology, Plastic Working, In-service Education

1984/09-1987/03, Nanjing Aeronautical Institute, Aeronautics and Astronautics Manufacture Engineering, Master

1980/09-1984/07, Nanjing Aeronautical Institute, Aeronautics and Astronautics Manufacture Engineering，Bachelor

4.Working experience:

2010/03-Present, Wuhan University of Technology, Department of Material Processing, Professor/Director

2002/06-2010/03, Wuhan University of Technology, Department of Material Molding and Control Engineering，Professor/Director

2001/03-2002/06, Wuhan University of Technology, Institute of Plastic Forming and Computer Application，Professor /Director

2000/11-2001/03, Wuhan University of Technology, Division of Auto-body Design and Manufacture，Professor

5.Research field(no more than 3):

1)New processing technology for difficult-to-form or lightweight material

2)Simulation, optimization and precise control of material forming process

3)New fabrication and processing technology for microelectronic packaging materials

6.Research project(no more than 5):

1)The basic study on fabrication of environment friendly adhesion material in microelectronic packaging by electromagnetic compaction (Project of NSFC：51475345)

2)Research on the plastic deformation behaviors of high strength steel for auto-body in high strain rate and complex strain paths (Project of NSFC：51205298)

3)Basic research on eletromagnetic and warming hybrid forming of magnesium alloy sheet using uniform pressure coil (Project of NSFC：50875192)

7.Representative papers and works(no more than 10):

(1)Fei Feng, Shangyu Huang*, Zhenghua Meng, Jianhua Hu. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures. Materials and Design, 57:10-20, 2014

(2)Fei Feng, Shangyu Huang*, Zhenghua Meng, JianhuaHu. A constitutive and fracture model for AZ31B magnesium alloy in the tensile state. Materials Science & Engineering A, 594: 334-343, 2014

(3)Fei Feng, Shangyu Huang*, Jianhua Hu, Zhenghua Meng, Yu Lei. Analysis of the bulging process of AZ31B magnesium alloy sheet with a uniform pressure coil. The International Journal of Advanced Manufacturing Technology, 69: 1537-1545, 2013.

(4)Feng Fei, Huang Shangyu*, Hu Jianhua, Lei Yu, Meng Zhenghua. Effects of temperature on electromagnetic forming of AZ31B magnesium alloy sheet. Journal of Plasticity Engineering,20(6):56-61, 2013.

(5)Lei Yu, Meng Zhenghua, Hu Jianhua, Feng Fei, Huang Shangyu. Experimental investigation on high rate forming of two kinds of typical High-strength steel in car manufacture. China Mechanical Engineering, 24(18):2529-2532, 2013.

(6)Zhenghua Meng, Shangyu Huang*, Jianhua Hu. Effects of process parameters on warm and electromagnetic hybrid forming of magnesium alloy sheets. Journal of Materials Processing Technology, 211(5): 863-867, 2011.

(7)Meng Zhenghua, Huang Shangyu*, Hu Jianhua. Experimental Research on Warm and Electromagnetic Hybrid Forming of Magnesium Alloy Sheet, Chinese Journal of Mechanical Engineering, 47(10):38-42, 2011.

(8)Yu Shihao, Huang Shangyu. Basic of Die&Mould CAD (“Eleventh Five-Year Plan” National Level Official Textbook), Wuhan: Wuhan University of Technology Press, 2009.

(9)Yu Shihao, Hua Lin, Huang Shangyu. Basic of CAD/CAM, Beijing:National Defence Industry Press, 2007.

(10)China Die&Mould Engineering Canon (Editor Article 3 in Volume 4 : Structure Design of Stamping Die & Mould), Beijing: Publishing House of Electronics Industry, 2007.

8.Contact information:

1) Tel: 18986281313

2) E-mail: huangshy@whut.edu.cn

3) Location of lab: Room 402 in The Material Building